Electrical Project /AMC

September 13, 2021

Commercial Fixed wiring

Fixed wiring is essential for all the electrical activities necessary on the site. This includes ensuring all the vital spots of a construction site have electrical power to use the heavy-duty equipment. This means installing power cables, sockets, distribution boards, etc.

Read More
November 19, 2020

Construction of high voltage electrical substations

Ultra-high-voltage and high-voltage substations are powered by high-voltage power lines, which are used to import and export electricity over long distances. Standards for such substations vary by country. For example, in the countries of Eastern Europe and the former USSR high-voltage substations are designed for voltage of 1250 kV, 750 kV or 400 kV.

Read More
Julu 19, 2020

Electrical substation construction

The construction of an electrical substation typically includes several stages: • preparation of the construction site and earthwork; • laying the foundation and supply of external networks; • construction of supporting metal structures; • assembly and installation of electrical equipment; • installation and configuration of auxiliary systems; • landscaping and cleaning construction waste; • testing and commissioning.

Read More
December 27, 2019

Construction of local area substations

Local area substations are connected directly to power plants or to high-voltage substations through overhead or underground power lines. These facilities provide energy to local areas with a large number of consumers. Modern technologies allow you to build these objects both in an open area, and in densely built-up urban areas. The number of busbars and other technical features of local substations are determined by the type, quantity and characteristics of electricity consumers.

Read More
August 23, 2019

SF6 gas-insulated switchgears

With the development of gas-insulated switchgear technology, the approach to the construction of electrical substations has changed significantly. This is an innovative technology in which all equipment is placed in a sealed metal case filled with SF6 gas (sulfur hexafluoride). Since the 2000s, this technology has made it possible to seal equipment with voltages up to 750 kV. Due to the highest degree of equipment integration, modern substations take up much less space and practically do not require periodic maintenance.

Read More
April 13, 2018

High-voltage vacuum switchgears

Vacuum technology has shown even better results than using air, gas or oil. High-voltage vacuum switchgears are safer and more reliable in situations where trips often occur, including a short circuit. The advantage of vacuum switchgears is that they are almost maintenance free. The dielectric strength of a vacuum is 8 times higher than that of air, and 4 times higher than that of gas at a pressure of 1 bar. Due to this, the distance between the open contacts can be quite short, up to 8 mm at 35 kV.

Read More
January 17, 2018

Modernization of electrical substations

The reliability problem manifests itself when equipment with different levels of reliability is installed at substations during modernization. Operation of such equipment without regard to interoperability leads to significant risks, including economic ones.

Read More
Load More